Industrial Aluminum Metal (Sheets, Plates & Extrusions)
Industrial-grade aluminum metal engineered for CNC machining, structural fabrication, and precision tooling. Supplied in standard and custom dimensions across 1000, 5000, 6000, and 7000 series alloys. Produced via direct chill (DC) casting and precision rolling/extrusion, ensuring uniform grain structure and minimal residual stress for subsequent machining operations.
-
![Aluminum Wire]()
Aluminum WireIndustrial-grade Aluminum Wire engineered for electrical power distribution, structural fabrication, and precision mechanical components.view more -
![High Purity Aluminum Ingot]()
High Purity Aluminum IngotIndustrial-grade high purity aluminum ingots produced via fractional crystallization or three-layer electrolysis refining.view more -
![Aluminum Shot]()
Aluminum ShotOur industrial-grade Aluminum Shot is engineered for precision surface preparation, deburring, and shot peening of non-ferrous components. Available in Cut Wire (extruded wire chopped to length) and Cast variants, it provides clean,...view more -
![Aluminum Powder]()
Aluminum PowderOur industrial-grade aluminum powder—featuring atomized spherical and flake morphologies—is engineered for powder metallurgy, refractory manufacturing, solar paste, and chemical synthesis.view more -
![Aluminum Granules]()
Aluminum GranulesIndustrial-grade Aluminum Granules (comprising high-purity cut wire and atomized shots) are manufactured from primary-grade aluminum ingots (>= 99.7% purity).view more -
![Aluminum Metal Ingot]()
Aluminum Metal IngotPrimary Aluminum Metal Ingot (Standard Grade Al 99.70) produced via the electrolytic reduction of alumina (Hall-Héroult process).view more
Key Features
High Strength-to-Weight Ratio
Optimal structural integrity with reduced dead weight compared to steel.
Corrosion Resistance
Natural oxide layer enhanced by optional anodizing or mill finish treatments.
Machinability
Excellent chip-breaking characteristics on 6061 and 7075 alloys, minimizing tool wear during high-speed milling.
Dimensional Stability
Thermal stress-relieved plates (such as 6061-T651) prevent warping during deep-pocket CNC pocketing.
Key Specifications
|
Available Alloys |
1060, 5052, 6061, 6063, 7075 |
|
Tempers |
O, H32, T6, T651, T5 |
|
Form Factor |
Sheets, flat plates, round bars, and custom extrusion profiles |
|
Thickness Range |
0.5 mm to 200 mm |
|
Width/Length Tolerances |
Conforms to ASTM B209 / EN 485 standards |
|
Surface Finish |
Mill finish, brushed, or PVC coated for scratch protection |
Chemical Composition (Typical % by Weight)
|
Alloy |
Si (Max) |
Fe (Max) |
Cu |
Mn (Max) |
Mg |
Cr |
Zn (Max) |
Ti (Max) |
Al |
|
6061 |
0.40–0.8 |
0.7 |
0.15–0.40 |
0.15 |
0.8–1.2 |
0.04–0.35 |
0.25 |
0.15 |
Balance |
|
7075 |
0.40 |
0.5 |
1.2–2.0 |
0.30 |
2.1–2.9 |
0.18–0.28 |
5.1–6.1 |
0.20 |
Balance |
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2–2.8 |
0.15–0.35 |
0.10 |
— |
Balance |
Aerospace: Tooling plates, jigs, and structural aircraft brackets.
Automotive: EV battery enclosures, chassis components, and heat exchangers.
Industrial Automation: Machine guarding frames, linear slide mounts, and conveyor systems.
Electronics: Enclosures, chassis, and high-dissipation heat sinks.
Melting & Casting: Inline degassing and ceramic foam filtration systems remove non-metallic inclusions prior to DC casting.
Rolling & Heat Treatment: Automated solution heat treatment and artificial aging furnaces maintain precise temper hardness (e.g., HBW hardness testing).
Inspection Protocol: Ultrasonic testing (UT) performed on plates over 50 mm thickness to detect internal voids; optical emission spectroscopy (OES) verifies melt chemistry per batch.
Packaging & Shipping
Export Packaging
Fumigation-free wooden pallets interleaved with moisture-resistant Kraft paper and plastic film protection.
Edge Protection
Hardened steel edge protectors secured with heavy-duty polyethylene strapping.
Logistics
Containerized shipping from major ports with full loading inspection reports.
Documentation
Mill Test Certificates (MTC): Supplied in accordance with EN 10204 3.1, detailing exact chemical analysis and mechanical test results (tensile strength, yield strength, elongation).
Compliance & Data Sheets: RoHS and REACH compliant material data sheets available for immediate review.
MOQ & Lead Time
Minimum Order Quantity (MOQ): 500 kg per size/alloy for standard mill production; stock items available for smaller trial orders.
Standard Lead Time: 15 to 25 days for custom cut or rolled stock; ex-stock items ship within 3 to 5 business days.
FAQ
Request a Quote
Provide your alloy grade, temper, dimensions, and quantity below to receive a direct mill or distributor quotation within 24 hours.
Alloy / Temper: [ E.g., 6061-T651 ]
Dimensions (Thickness x Width x Length): [ E.g., 50mm x 1500mm x 3000mm ]
Quantity: [ E.g., 2,000 kg ]
Destination Port: [ E.g., Port of Hamburg / Port of Los Angeles ]
As one of the leading aluminum metal manufacturers and suppliers in China, we warmly welcome you to buy high quality aluminum metal at competitive price from our factory. Contact us for more details.
High Carbon Silicon Granules
