FAQ
I. Role in the Metallurgical Industry (Most Common)
1. Deoxidizers in Steelmaking
Silicon carbide contains:
Silicon (Si)
Carbon (C)
In molten steel, it reacts with oxygen:
Si + O → SiO₂
C + O → CO↑
Therefore:
It can rapidly deoxidize
Reduce oxide inclusions
Improve molten steel purity
Compared to using ferrosilicon alone:
Higher deoxidation efficiency
Greater heat release
Better recovery rate
Commonly used in:
Electric arc furnace steelmaking
Final deoxidation in converters
Specialty steels
2. Carbon-adding function
The fixed carbon in silicon carbide can increase the carbon content in steel.
Advantages:
High absorption rate
Low impurities
Low nitrogen content
Therefore, many foundries use silicon carbide to partially replace carbon-increasing agents.
3. Improving Molten Iron Quality (Casting)
The effect is particularly noticeable in gray iron and ductile iron.
Functions include:
Improving graphite morphology
Promotes:
Formation of Type A graphite
Graphite refinement
Uniform distribution of graphite
Consequently, it can:
Improve mechanical properties
Reduce the tendency toward white cast iron
Improve machinability
Enhance inoculation effects
Once silicon carbide enters the molten iron:
It provides nucleation sites
It improves microstructure
It can partially replace:
Ferrosilicon inoculants
It reduces shrinkage porosity and gas pores
Because the molten iron has better fluidity:
Shrinkage defects are reduced
Castings are denser
II. Refractory Materials Industry
Silicon carbide refractory materials are widely used in:
Blast furnaces
Rotary kilns
Ceramic kilns
Waste incinerators
Reasons:
1. High-temperature resistance
Can withstand temperatures of:
Over 1600°C
2. High thermal shock resistance
Resistant to cracking caused by thermal cycling.
3. Wear resistance
Suitable for:
High-wear environments
Areas subject to high erosion
III. The Abrasives Industry
Silicon carbide has extremely high hardness, second only to:
Diamond
Cubic boron nitride
Therefore, it is widely used in:
Grinding and cutting
For example:
Grinding wheels
Sandpaper
Polishing materials
Cutting discs
Green silicon carbide
Higher purity:
Used in cemented carbide
Photovoltaic wafers
Precision grinding
Black silicon carbide
More commonly used for:
Cast iron
Non-ferrous metals
General grinding
IV. New Energy and Electronics Industries (Fastest-Growing)
1. Semiconductor Materials
Among third-generation semiconductors, silicon carbide is one of the core materials.
Advantages:
High-voltage resistance
High-temperature resistance
Excellent high-frequency performance
Low power consumption
2. Electric Vehicle Applications
Automakers such as Tesla make extensive use of SiC power devices.
Applications:
Electric drive systems
Inverters
On-board chargers
Benefits:
Improved driving range
Reduced heat generation
Higher conversion efficiency
3. Photovoltaics and Energy Storage
Silicon carbide devices can improve:
Photovoltaic inverter efficiency
Energy storage system efficiency
As a result, demand has grown rapidly in recent years.
V. Chemical and Ceramics Industries
Chemical Processing Equipment
Silicon carbide offers excellent corrosion resistance and is used in:
Pumps
Seals
Heat exchangers
Particularly suitable for:
Strong acids
Strong alkali environments
The ceramics industry
Used in:
High-performance structural ceramics
Ballistic ceramics
Thermal conductive ceramics
VI. Differences in the Applications of Various Types of Silicon Carbide
| Type | Characteristics | Main Applications |
| Black silicon carbide | Good toughness | Metallurgy, abrasives |
| Green silicon carbide | High purity | Precision cutting, semiconductors |
| Metallurgical-grade SiC | Low cost | Steelmaking, casting |
| Semiconductor-grade SiC | Ultra-high purity | Chips, new energy |

